This version dated June 6, 2007 adds a number of bug fixes and additional features to PoleAlignMax V 2.0.1.
1. Fixes bug that recommends alignment correction in wrong direction if image is mirrored such as with AO-7.
2. Fixes bug that recommends elevation alignment correction in wrong direction if the telescope RA axis is pointing below the North pole. This bug had the undesireable effect of requiring extra iterations to converge to optimal alignment.
3. Adds Expose and Solve test button to Plate Solve tab which helps for diagnosing Plate Solution problems.
4. Adds many improvements to Log reporting.
5. Adds Post-exposure delay option to Setup tab.
6. Adds Cross hair width option to Centering feature on Setup tab.
7. Polar plot scale is adjusted by factors of 10 depending on alignment error magnitude to show greater sensitivity.
Warning: You must use Internet Explorer for this download. Netscape does not work.
1. Enter the required user information below.
2. Click a "Download " button to download PoleAlignMax to your hard drive.
3. Double click "PoleAlignMaxV2.0.35.msi" to start installation.
4. Remove any possible old version of PoleAlignMax by selecting the installer Remove option. You will not lose any of your settings by this removal. After removal is complete, Double click on "PoleAlignMaxV2.0.35.msi" again to install.
5. Read the Help file that you will find when you launch PoleAlignMax and click on the Help menu.
If you have trouble downloading, please contact:
Larry Weber larryweber@idsi.net
Steve Brady sbrady10@verizon.net